HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
6010
9154
As a result of this operation,
you will not be able to
re-start ERASE R-VOL
operation. To d elete the
pair forcibly, please try
againwithForce option.
Please follow the instructions
in the message.
W
0
6010 9155
The history file has been
updated. Select the OK
button to display the history
logs from the beginning.
Click [OK].
i
0
6010 9300
WARNING: Destination
volume of specified volume
pair may contain some
inconsistency, because
volume copy is not
completed yet. Full volume
initialization is required
before re-using it.
Please fol
low the instructions
in the
mess
age.
W
0
6010 9301
WARNING: Through this
operation, M-VOL status will
be
changed to SMPL status
forcibly , but R-VOL status
will not be changed. If you
do
this operation, please
change the R-VOL status to
SMPL later.
Please follow the instructions
in the message.
W
0
6010 930 2
There are no RCP ports.
Set the port to RCP before
registering RCU. Moreover ,
setupthe correctrange of
CU
numbers to which the
RCP port is applied.
W
0
601
0
930
3
There are no valid volumes.
There is no valid volume.
Check the device emulation
and
the definition of the
SCSI path (for Continuous
Access).
W 0
6010
9304
WARNING: Group or
C/T is specified for Delete
Range. Confirm all pairs in
thegroup aresynchronized.
If
some volumes are not
synchronized, full volume
initializations are required
before re-using them.
Please follow the instructions
in the message.
W
0
6010 9305
There are no initiator ports.
Set the port to Initiator
before registering RCU.
W
0
6010 9306
The Continuous Access
function is not installed in
this
controller. You cannot
create pairs.
There is no Continuous
Access license. Set the
license.
W
0
6010 9307
You specified the same
volumes more than once.
The duplicate occurrences
were excluded.
Since the same volume
where multiple paths are
defined was selected,
the overlapped one was
eliminated. Click [OK] and
continue.
W 0
XP24000 Remote Web Console Error Codes
231