HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6505 8001
A communication time-out
error occurred in the
subsystem. Please wait for
a
while, and then retry the
operation.
Please wait a while, then
retry the operation.
E
3
6505 8002
A communication time-out
error occurred in the
subsystem. Please wait for
a
while, and then retry the
operation.
Please wait a while, then
retry the operation.
E
3
6505 8100
An error occ
urred during
SVP processing. If this
problem persists, please call
technical support.
Retry the o
peration. If
this
probl
em
persists, call
technical
support.
E
2
6505 8102
This function is not
supported.
Check whether the
DKCMAIN microcode
version and the SVP
micro code version are
mismatched.
E
3
6505 87 00
Please retry operation. Retry the operation.
i
4
6505 87 01
The log
ical path between
the
loc
al and
the remote
subsys
tems is invalid.
Check the path status and
edit the path again.
i
4
6505 87 02
The status of the primary
data volume is not valid.
Please refresh and check
the window. If possible,
retrythe operationonthe
primary data volume.
i
4
6505 87 03
The specified number of
pathsislessthan the
minimum number of paths
in the
DKC Option window.
Check the number of paths.
i
4
6505
8704
The s
pecified number of
pat
hs is less
than the
min
imum
number of paths
in
t
he
DKC Option window,
du
e
to a communication
er
ror between the local and
th
eremotesubsystems.
Please check the path status
in
the DKC Status window,
then
restore the paths.
W 4
65 05 8 705
The path could not
be
deleted due to a
communication error
between the local and
theremotesubsystems.
Please check the CHA status
on
the window. If the CHA is
blocked, replace the CHA,
then
retry the operation.
W 4
6505 87 06
Parameter specified
by Continuous Access
operation is invalid.
Enter the correct data.
i
4
6505 87 08
The pair status of the
secondary data volume is
incorrect.
Please refresh the window,
then
check the pair status. If
possible, retry the operation
on the
secondary data
volume.
i
4
65 05 8 709
Continuous Access
operation was rejected.
Please replace the channel
adapter, then retry the
operation.
E
4
236
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes