HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6505 8744
The specified primary data
volume cannot be used.
Check whether the primary
data volume is in any of the
following conditions:
•
Data in the primary data
volume is being copied;
correction copy or drive
copy is in progress.
•
The primary data volume
is in
correction access
condition.
•
The primary data volume
is
blocked.
•
The primary data volume
is being maintained.
•
The access attribute of
the
primary data volume
is
Read Only.
W 4
6505
87 45
The secondary data volume
is
already in use by another
system.
Check whether the
secondary data volume in
the
remote storage system,
which are connected from
hosts or the SVP, is in any of
the following conditions:
•
The secondary data
volume is being used by
Dual Copy.
•
The secondary data
volume is being used by
Compatible XRC.
•
The secondary data
volume is being used
by
PPRC or Continuous
Access.
•
The secondary data
volume is being used by
Concurrent Copy.
•
The access attribute
of the
secondary data
volume is Read Only.
i
4
6505
87 46
The emulation type of the
primary d ata volume is not
supported by Continuous
Access Journal or Universal
Replicator for Mainframe.
Please see the
INSTALLATION SECTION
and
the OPENPLATFORM
SECTION in the
maintenance manual to
check if the device emulation
of the primary data volume
is
supported.
i
4
6505
87 49
The specified secondary
data volume is online.
Please check if the
secondary data volume
is online. If the secondary
data volume is online, vary
thevolumeoffline, then
retry the operation. If the
secondary data volume is
connected to a VM system,
vary thevolumeoffline from
the
VM system.
i
4
240
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes