HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
65 05 8896
Parameter error has
occurred.
Refresh the window and
retry. If nothing changes,
call
technical support.
E
4
65 05 8897
LUs exist on the port.
Please delete the LUs defi ned
on the
port and retry the
operation.
E
4
65 05 8898
Pending data e
xists on the
port.
Retry the operation.
i
4
65 05 8899
An internal error occurred.
Please check the SSB log,
then
call technical support.
E
4
6505 8900
An error occurred during the
port change.
Please call technical
support.
E
4
6505 8901
An error occurred during the
port change.
Please call technical
support.
E
4
6505 8902
An error occurred during the
port change.
Please call technical
support.
E
4
6505 8903
Unknown Error Code.
Please call technical
support.
E
4
6505 8915
Remote We
bConsole
attempt
ed to
change the
port typ
e.
However , this
attempt
was rejected
becaus
e
the same operation
was in p
rogress from a host.
Please check the status
of the port, and retry the
operation.
W 0
6505 8922
The primary subsystem does
not support remote copy via
serial interface.
Check whether the primary
storage system supports
remote copy via serial
interface. Install the
microcode that supports
remote copy via serial
interface, or execute remote
copy via fibre interface.
E
4
6505
8924
Logical paths are defined
to
the port on the remote
subsystem.
Please delete the logical
paths on the specified port
and
retry the operation.
E
4
6505 8929
In
valid port type.
Ple
ase
check the port type
of
the specified port and
re
try the operation.
W 4
65 05 8930
Logical paths are defined
to
the port on the remote
subsystem.
Please delete the logical
paths on the specified port
and
retry the operation.
E
4
6505 8931
Logical paths are defined
to
the port on the remote
subsystem.
Please delete the logical
paths on the specified port
and
retry the operation.
E
4
6505 8932
Failed to create the
logical path, because the
configuration definition of
the
specified LD KC number
did not exist in t he primary
storage system.
Please check whether the
specified LDKC number is
defined in the configuration
of
the primary storage
system.
W
0
244
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes