HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
6510 9 309
All paths which you set have
already been registered.
This operation will terminate
because there is no path
which can be added.
Since all the added paths
are redundant, the paths
cannot
be added. Click
[OK] and continue.
W 0
6510 9327
The monitoring time is over,
but the history file is not fully
updated yet.
Click [Refresh] to update the
history file. If this problem
persists, call technical
support.
i
0
6510 9332
This operation is not applied
yet.
Click [OK], then continue
the operation.
i
0
6510 5503 6
Too many data volumes in
the
journal group.
Check the number of data
volumes in the journal
group. Then delete unused
data volume pairs, or
register them in another
journal group.
i
0
6510 55037
Too many mirrors in the
journal group.
Check the number of mirrors
in the
journal group. Then
delete unused mirrors, or
register them in another
journal group.
i
0
6510 5 5038
Too many mirrors in the
subsystem.
Check the number of mirrors
in the
journal group, then
delete unused mirrors.
i
0
6510 55039
You are specifying Group
for the range and trying to
manipulate the same mirror.
Select only one data volume
pair in the mirror when you
specify Group for the range.
Check the range setting. If
you specify Group, select
only one data volume pair
in the
mirror.
i
0
6510 55202
The specified controller ID
cannot
be used.
Please check the specified
controller ID.
W
0
6510 55207
Some
of
the specified values
are i
ncorrect. Two times the
val
ue
of M-JNL Cache plus
the
value of R-JNL Cache
mus
tbeequal to or less
th
an 100. Or, the value
of
Threshold of start Async
JN
Lmustbeequal to or less
th
an
the value of Threshold
o
fstart Sync JNL.
The
value of Threshold of
sta
rt Async JNL must equal
or
b
e
less than the Threshold
of
start Sync JNL value.
W
0
6510 55208
The specified journal group
number is incorrect. Specify
the correct journal group
number.
Specify the correct journal
group number.
W
0
6510 55 229
You want to forcibly delete
pairs, but there are some
pairswhere Groupisnot
specified as the range.
Specify Group as the range
when you want to forcibly
delete pairs.
Please specify normal
deletion, or specify Group
as the
range.
W 0
XP24000 Remote Web Console Error Codes
279