HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6510
59104
The specified parity group
does not contain volumes
that can be registered or
deleted
as journal volumes.
Please specify another
parity group.
W
0
6510 59108
The master journal group
number for the specified
data volume exceeds 0x0F.
Please check the master
journal group number for
the
specified data volume.
Please change the journal
group number if you are
performing an Add Pair
(Paircreate) operation.
Please delete the d ata
volume from the Preview set
list if you are performing
aResumePair (Pairresync)
operation.
W
5
6510 59111
There are
two or more CLPR
numbers f
or the
specified
data vol
ume. In this
operati
on, please specify
only one
CLPR number.
Please check the CLPR
number for the specified
data volume, and specify
only one C LPR number.
W
5
6510 59112
The CLPR number of the
specified data volume is
different from the CLPR
number of
the data volume
in the
Preview list. In this
operation, please specify
only one C LPR number.
Please specify only the
volume that has the same
CLPR number as th e CLPR
number of the volume in the
Preview list.
W
5
6510 59113
Thereare twoormoreCLPR
numbers for the specified
volume, or y ou tried to
register a volume different
from the CLPR number of
an
existing volume. Two or
more CLPR numbers cannot
exist in one journal group.
Please check the CLPR
number of the specified
volume, and check the CLPR
numbers of any existing
volumes. Specify the volume
so that
there is only one
CLPR number in the journal
group.
W
5
6510 59115
T
he
number of Preview data
m
ay have exceeded the
l
imit,ortoo largenumberof
data is selected.
If
there are some Preview
da
ta, check the number.
If
it is too
large, clear the
P
review data by clicking
[
Apply] and retry the
o
peration. If there is no
Preview data, too much
data is selected. Reduce the
number of data and retry
the
operation.
W
5
6510 59116
The specified function is not
supported by the current
microcode version.
Check the microcode
version of the DKCMAIN,
then
call technical support.
W
0
6510 59119
The current microcode
version does not allow you
to change options for a
journal group in the Active
status.
Check the microcode
version of the DKCMAIN,
then
call technical support.
W
0
282
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes