HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
6510 59153
The journal volume cannot
be
deleted because the
status of the mirror of the
journal group is Active.
Change the status of the
mirror of the journal group
to
Stop or Initial, then retry
the operation.
W 0
6510 59323
The entered parameter is
invalid.
The serial number, the
controller ID or the journal
group to be added is not
specified.
Check the entere d
parameter.
W
0
6510 59 325
Apairwhich
is
ready for
Delta resyn
c
cannot be
created und
er the
current
status of t
he
specified master
journal gr
oup. Check the
status of the specified master
journal group.
Check the status of the
specified master journal
group.
W
0
6510 59326
Specify a mirror ID other
than 0 if you create a pair
ready for Delta resync.
Specify a mirror ID other
than 0.
W
0
6510 59327
You cannot specify [Entire]
or [None] to the
Initial copy
mode
under the current
status of the specified master
journal group. Check the
status of the specified master
journal group.
Check the status of the
specified master journal
group.
W
0
6510 59 328
The journal volume cannot
be
deleted because the
attribute of the mirror for
the
journal group i s master
and
t
he
status of the mirror
is
H
old.
Change the status of the
mirror of the journal group
to
Initial, then retry the
operation.
W
0
6510 59329
The serial number of the
local DKC is entered. Select
the
check box when you
add
the journal group of the
local DKC to the extended
consistency group (EXCTG).
Check the check box when
you add the journal group
of
the local DKC to the
extended consistency group
(EXCTG).
W
0
6510 59330
Thelocal DKCcannotbe
specified for the extended
consistency group (EXCTG).
Delete other DKC to use the
journal group of the local
DKC.
Delete other DKC to use the
journal group of the local
DKC.
W
0
6510 59331
A LUSE volume is included
in the
specified volumes.
The current version of the
microcode does not allow
you to create pairs using
LUSE volumes.
Check whether the specified
volume is a L USE volume.
Also, check the version of
the microcode of the storage
system.
W
0
6510 59 335
Thevalue of thepathwatch
time is
not entered or is
outside the range. Check
the
value of the path watch
time.
Check the value of the path
watch time.
W 0
XP24000 Remote Web Console Error Codes
283