HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
6610
5140
The specified CU number
is
incorrect. Specify the
correct CU number.
Specify the correct CU
number.
W
0
6610
5141
The specified LDEV number
is
incorrect. Specify the
correct LDEV number.
Specify the correct device
number.
W
0
6610
5144
Some of the entered values
are incorrect. Check the
values and then specify
correct values.
Check the values, then
specify correct values.
W
0
6610 7301
An error occurred in client
logic.
Please call technical
support.
E
2
6610 7 302
An error occurred in client
logic.
Please call technical
support.
E
2
6610 7 303
An error oc
curred in client
logic.
Please cal
l
technical
support.
E
2
6610
7440
An error occurred during
processing. If this problem
persists, please call
technical support.
If thesameerror occurs
despite retrying, call
technical support.
E
2
6610 8101
The system cannot apply the
new configuration. Do you
want to refresh?
Click [Refresh], and retry.
W
5
6610 9006
Exchange the channel
cable c
onnections after
confir
mation of the port
type.
Check the port type, then
change cable connections.
W
5
6610 9008
SIMs of Continuous Access
Journal and Universal
Replicator for Mainframe
are cleared.
Click [OK].
W
0
6610 9009
The export i s complete. Click [OK].
i
0
6610 9021
The
Port Setting process has
not
completed. Do you want
to
c
ontinue for other ports?
To co
ntinue processing,
click [Yes]. If the processing
fini
shes, reconfigure the port
tha
t
is not in operation.
W
5
6610
9024
Are you sure you w ant to
exchange the specified
ports? Please confirm the
associated channel paths
are off-line.
Please ensure that the
associated channel paths
are offline.
W
5
6610 9025
Are you sure you w ant to
switch the ports? If the
remote copy paths exist
on the
ports, delete them
beforehand.
Please remove remote copy
paths associated with the
ports.
W
5
XP24000 Remote Web Console Error Codes
285