HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6610 9026
Are you sure you want to
switch the ports?
If
any remote copy paths
exist on the ports, delete
them
beforehand.
Also, to avoid the switching
operation from being
reported as a failure,
confirm firstthata message
prompting you to change the
channel cable connections is
displayed, and then perform
the necessary changes.
To continue to change ports,
click [OK].
W
5
6610 9100 Do you want to exit?
To exit the window, click
[OK]. Otherwise, click
[Cancel].
i
0
6610 9101
Do you wan
ttocancel?
To cancel the operation,
click [OK].
i
0
6610 9102
Do you want to apply?
To apply settings in Preview
to the
disk storage system,
click [OK].
i
0
6610
9104
Do you want to change the
mode?
To apply settings in Preview
to the
disk storage system,
click [OK].
i
0
6610 9105
The value that is under setup
is not
reflected yet. Do you
want to exit?
To dis
card the current
setti
ngs and exit the window,
click
[OK]. Otherwise, click
[Can
cel].
i
0
6610 9106
The value that is under setup
is not
reflected yet. Do you
want to change the mode?
To discard the current
settings and switch to
View mode, click [OK].
Otherwise, click [Cancel].
i
0
6610 9107
The value that is under setup
is not
reflected yet. Do
you want to continue the
operation?
To discard the current
settings and refresh
the
window, click [OK].
Otherwise, click [Cancel].
i
0
6610 9111
Do you want to delete the
specified line of settings
f
rom the Preview list?
To discard the current
settings, click [OK].
Otherwise, click [Cancel].
W
0
6610 9112
Do you want to continue this
operation?
To continue the current
operation, click [OK].
Otherwise, click [Cancel].
i
0
6610 9113
Are you sure you want to
clear SIMs of Continuous
Access Journal and
Universal Replicator for
Mainframe?
T o clear SIMs, click [Yes].
Otherwise, click [No].
W 0
6610 9115
The monitoring was stopped
by a nother operator. The
graph will be closed.
Click [OK].
i
0
6610 9116
Anotheroperatorhas
changed the Gathering
Interval value. The graph
will be closed.
Click [OK].
i
0
286
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes