HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
0003 1124
The command device setting
and the command device
secur ity setting are incorrect.
You cannot do any of
the
following to the same
volume:
•
Specify the volume as
a
command device and
disable command device
security on the volume.
•
Specify the volume as
a
non-command device
and e nable command
device securit y on the
volume.
The setting method of
command device/command
device security is incorrect.
The following set tings are
invalid.
1.
Set command device
+
Release command
device security
2.
Release command
device + Set command
device security
It
does not occur
normally because
it is
guarded in
the screen. In the
unlikely eventthatthis
error occurs, contact
technical support.
E
2
0003 1125
There are no host groups
where the WWN will be
registered.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1126
Avolu
me
set as a command
devic
ecannotbeusedas
acomp
onent
of a LUSE
volu
me. Select another
volu
me.
Correct the specified
contents, and request again.
E
6
0003 1127
An error occurred. If this
problem persists, please call
technical support.
CHA high-speed mode is
specified to unmounted
CHA.
The error does not
occur normally because it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
0003 1128
An error occurred. If this
problem persists, please call
technical support.
A request has been made to
change to a channel speed
that the Fibre PCB does not
support it. The error does
not
occur normally because
it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
0003 1129
An error occurred. If this
problem persists, please call
technical support.
When th e WWN is
registered in LUN Manager,
the number of WWN s you
can register is exceeded.
The error does not occur
normally because it is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
XP24000 Remote Web Console Error Codes
29