HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6610 59026
The same DKC is specified
more than once. Check the
DKC setting.
Check the DKC setting.
W
0
6610 59030
The monitoring data saved
at
present will be deleted.
To continue the operation,
click [OK]. To cancel the
operation, click [Cancel].
The current monitoring data
will be deleted if you change
the
setting of the monitoring
switch. If necessary, use
the
Performance Monitor
Export Tool to export the
monitoring data file.
i
5
6610 59031
The monit
oring data saved
at
prese
nt
will be deleted
when the
monitoring switch
is set
to
Enable the next
time.
To continu
eprocessing, click
[OK]. To s
top
processing,
click [Ca
ncel].
The monit
oring data
currentl
ysaved will be
deleted
when you change
the
setting of the monitoring
switch
.
If necessary, use
the
Exp
ort Tool to save the
monito
ring data.
i
5
6610 59040
You cannot add journal
volumes because Universal
Replicator for Mainframe is
not installed.
Purchase a license for
Universal Replicator for
Mainframe, then install it.
W 0
6610
59041
Warning:
Amainframe volume is
included in the journal
volumes to be deleted.
Please note the following
points if
you have ma de
volume pairs by using this
journal group before.
•
The mainframe volume
will be blocked.
•
The mainframe volume
needs
to be formatted
when you use the volume
as a
non-journal volume.
•
The LDKC number, the
CU
number and the
LDEV number of the
mainframe volumes are
recommended to be
recorded.
Do you want to continue
the
operation?
To delete the journal volume,
click [Yes]. Otherwise, click
[No].
It is
recommended that you
record the LDKC number, the
CU
number and the LD EV
number of the mainframe
volume.
W
0
290
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes