HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
7005 55264
The command was rejected,
because you tried to create
avolumepair formed with
avolumetowhich VMAis
set by Data Retention Utility
and a
volume without VMA.
You cannot create a pair
using these volumes.
To create a pair by using
avolumewithout VMA,
you must only use volumes
without VMA. To create a
pair by using a volume with
VMA,
you must only use
volumes with VMA.
i
0
7005 55301
You cannot create the
pair, because the licensed
capacity of Data Retention
Utility is insufficient.
Increase the licensed
capacity of Data Retention
Utility, and retry the
operation. When an
SLPR is allocated, check
the licensed capacity of the
SLPR.
E
6
7 005 56301
An error o
ccurred d uring
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
7 005 56302
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
7005 56303
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
7005
565 2
4
This function cannot be used
by
the storage partition
administra tor.
Select another window. To
set this function, contact the
storage administrator.
E
3
7005 57101
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
7005 57102
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
7005 58000
T
he
command has been
r
ejected b ecause the
cascade request for creating
cascade pairs composed
of
volumes belonging to
the
same c onsistency group
was issued.
Select a different volume
or
release the consistency
group setting.
i
0
7005 58001
The operation of the L2
pair failed because the
L1
pair was in COPY(SP)
status, PSUS(SP) status or
COPY(RS-R) status.
Wait until the L1 pair status
changes to PSUS or PAIR,
then retry th e operation.
i
0
XP24000 Remote Web Console Error Codes
309