HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
0003 1137
Failed to form a LUSE
volume because the number
of LUSE volumesexceedsthe
maximum that can be set in
adiskarray subsystem.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1138
An error occurred. If this
problem persists, please call
technical support.
An error occurred. If
this problem persists, call
technical support.
E
2
0003 1140
Because the Port Group
settingisdone, it is
impossible to change.
Please release the P ort
Group setting.
Please rele
ase
the Port
Group sett
ing.
E
2
0003
1141
Processing in progress.
Please wait for a while, and
then
retry the operation.
Please log in again after a
while.
E
2
0003 1154
An error occurred during
SVP processing. If this
problem persists please cal l
technical support.
If this problem persists, call
technical support.
E
2
0003 1156
An erro
r
occurred d uring
SVP processing. If this
problem persists please cal l
technical support.
If this problem persists, call
technical support.
E
2
0003 1159
An error occurred during
SVP processing. If this
problem persists please cal l
technical support.
If this problem persists, call
technical support.
E
2
0003 1169
An error occurred during
SVP processing. If this
problem persists please cal l
technical support.
If this problem persists, call
technical support.
E
2
0003 1170
Th
e
volume cannot be
co
nfigured as a command
de
vice because the volume
d
oes
not have Read/Write
a
ttribute.
Please correct settings, then
retry .
E
6
0003
1171
This LU cannot be combined
into or released from a
LUSE volume because it is
not a
Read/Write enabled
volume that is also usable
as an
S-VOL (secondary
volume).
Please correct settings, then
retry .
E
6
0003 1172
The LUs cannot be combined
or
released because
the
volumes don't have
Read/W rite attribute.
Please correct settings, then
retry .
E
6
0003 1173
Failed to set the host
because the number of hosts
exceeds the maximum that
can be set in a port.
Please correct the settings,
then retry.
E
6
XP24000 Remote Web Console Error Codes
31