HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
7105 8607
Cannot change the pair
status, because the status of
the
Continuous Access pair
that shares this volume is
not
Suspend.
Change the status of the
Continuous Access pair,
then
retry the operation.
i
0
7105 8608
The specified T-VOL is not
defined.
Refresh the screen, and retry
the
operation.
i
0
7105 8609
The specified volume is not
set
as a reserved volume.
Check the status of the
volume.
i
0
7105 8610
The T-VOL is a target volume
for Auto LUN.
Release the Auto LUN
setting.
i
0
7105 8611
The specified volume is a
T-VOL.
Check the status of the
volume.
i
0
7105 8612
The specified volume is not
a
T-VOL.
Check the status of the
volume.
i
0
7105 8613
The RAID level of the
specified T-VOL is not
supported.
Specify a volume of the
supported RAID level.
i
0
7105
8614
The T-VOL is used as a
Continuous Access M-VOL.
Delete the Continuous
Access pair.
i
0
7105 8615
The T-VOL is used as a
Continuous Access R-VOL.
Delete the Continuous
Access pair.
i
0
7105 8618
The T-VOL is already defined
as
an S-VOL.
Check the volume number.
i
0
7105 8619
The specified T-VOL is
defined as a source volume
for Auto LUN.
Release the Auto LUN
setting.
i
0
7105 8622
The volume specifi ed as a
reserved volume is already
defined as a Continuous
Access M-VOL.
Delete the Continuous
Access pair.
i
0
7105 8623
The volume specifi ed as a
reserved volume is already
defined as a Continuous
Access R-VOL.
Delete the Continuous
Access pair.
i
0
7105 8624
The selected volume is not
paired.
Check the specified volume
number.
i
0
7105 8625
The P
-VOL(S-VOL) and
S-VO
L(T-VOL) have the same
num
ber.
Check the specified volume
number.
i
0
7105 8626
The Simplex command
was rejected, because the
high-speed Split was in
progress.
After the high-speed Split
is
completed, retry the
operation.
i
0
7105 8627
The Reverse Resync
command
was rejected,
because the high-speed
Split was in progress.
After the high-speed Split
is
completed, retry the
operation.
i
0
324
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes