HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
7110 7311
The settings could not be
applied.
Wait a while, and retry the
operation. If the same error
occurs despite retrying,
Please call technical
support.
W 0
7110 7312
The password could not be
acquired.
Please call technical
support.
W
0
7110 7313
Error details not available.
Please call
technical
support.
W 0
7110
744 0
An error occurred during
processing. If this problem
persists, please call
technical support.
If this problem persists, call
technical supp ort.
E
2
7110 8001
A time-out error occurred.
Please wait for the subsystem
to recover to the normal
condition, and then retry the
operation.
Retry the operation. If
you get the same message
again, reboot the computer.
If
necessary, call technical
support.
E
4
7110 8534
An inter
nal
logic
contrad
iction occurred.
Please c
all technical
support
.
i
0
7110 8658
Some settings could not be
applied normally. R efer to
the
error code.
Check the error code in
Preview list.
E
0
7110 8659
There is no volume.
Check the contents, and
retry .
i
0
7110 9002
The requested operation has
completed.
The op
eration was ended
norm
ally. Execute the next
oper
ation.
i
0
7110 9005
An error occurred. Check
the
error code.
An error occurred during
the indicated operation.
See
the error code for each
operationinPreview List.
i
0
7110 9101
Do you want to ca n cel? To cancel, click [OK].
i
0
7110 9102
Do
you want to apply?
Click [OK] to execute the
operation.
i
0
7110 9108
The option has been
changed. If you continue
processing before applying
the
change, the option
will be reset to the current
setting. Do you want to
continue
processing?
To continue processing,
click [OK]. Otherwise, click
[Cancel].
W
0
7110 9109
Do you want to execute the
Set
Over operation?
To continue processing,
click [OK]. Otherwise, click
[Cancel].
W
2
7110 9110
Do you want to execute the
Initialize operation?
To continue processing,
click [OK]. Otherwise, click
[Cancel].
W
2
7110 9377
Do you want to enable
the
setting to expand the
number of relationships?
To continue processing, click
[OK]. To stop processing,
click [Cancel].
i
0
332
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes