HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
8105
1024
An error occurred. If this
problem persists, please call
technical support.
Fibre topology information is
invalid. (The specified value
is not
in the specification.)
The error does not occur
normally because it is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
8105 1025
The specified LU path does
not
exist.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1028
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
The Configuration
informat
ion has been
already
changed.
Please c
heck the settings
and request the setting of the
configu
ration information
again.
E
6
8105 1029
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
8105 1050
The following volumes
cannot
be specified when
you change expanded LU
configurations:
•
Volumes reserved by
Auto LUN
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1059
LUN Manager function (LUN
security) settings are given
to the ports other th an Fibre
ports.
Check the setting.
You are trying to perform
LUN
Security operation for
no
n-Fibre port. The error
do
es not
occur normally
be
cause it is guarded in
t
he
screen. In the unlikely
e
vent that this error occurs,
c
ontact technical support.
E
2
8105 1061
An error occurred. If this
problem persists, please call
technical support.
You are trying to perform
LUN Security operation for
aport where LUNSecurity
function is invalid. T he error
does not
occur normally
because it is guarded in
the screen. In the unlikely
eventthatthiserror occurs,
contact technical support.
E
2
8105 1063
The specified WWN is
already in use. Specify
another WWN.
Correct the specified
contents, and request the
setting o f the configuration
information again.
E
6
XP24000 Remote Web Console Error Codes
339