HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
8105 1127
An error occurred. If this
problem persists, please call
technical support.
CHA high-speed mode is
specified to an unmounted
CHA.
The error does not
occur normally because it
is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical supp ort.
E
2
8105 1128
An error occurred. If this
problem persists, please call
technical support.
A request has been made
to
change to a channel
speed change is requested,
but Fibre PCB does not
support it. The error does
not
occur normally because
it is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical supp ort.
E
2
8105 1130
The spec
ified name is the
same as t
he
system default
name. P
lease change the
name.
Correct
the
specified
conten
ts, and request again.
E
6
8105 1131
Failed to set the host group
because the number of
host groups exceeds the
maximum that can be set in
aport.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1132
Failed to set the WWN
because the number of
WWNs exceeds the
maximum that can be set in
aport.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8
105
1
133
Failed to set the host mode
because the number of
host modes exceeds the
maximum that can be set in
aport.
Th
eConfiguration
information has been
already changed.
Please check the settings
a
nd
request the setting of the
configuration information
again.
E
6
8105 1134
Failed to set the path
because the number of
pathsexceedsthe maximum
that can be set in a port.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
342
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes