HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
8105 1135
An error occurred. If this
problem persists, please call
technical support.
When PORT information
(Fibre Address/Fibre
Topology/Channel Speed)
is set, multiple change
instructions are set to the
same PORT.The errordoes
not
occur normally because
it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
8105 1136
An error occurred. If this
problem persists, please call
technical support.
When CHA high-speed
mode is set, multiple change
instructions are set to the
same PORT.The errordoes
not
occur normally because
it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
8105 1137
Failed to from a LUSE
volume because the number
of LUSE volumesexceedsthe
maximum that can be set in
adiskarray subsystem.
The Confi
guration
information has been
already changed.
Please check the settings
and
re
quest the setting of the
configuration information
again.
E
6
8105
1140
Nothing is set. Create a
setting and then execute it.
Please release the P ort
Group setting.
W
6
8105 1170
The volume cannot be
configured as a command
device because the volume
does not have Read/Write
attribute.
Please connect settings, then
retry .
E
6
8105 1181
The specified path cannot be
added, because the volume
is
used by a Continuous
Access pair.
Correct the specified
contents, and request again.
E
6
8105 1183
The port information is
inconsistent with PCB mo de
information.
Please correct the port
information or the PCB
mode information.
W
0
8105
1184
The port information is
inconsistent with PCB mo de
information.
Please correct the port
information or the PCB
mode information.
W
0
8105 1190
To define a path to the
volume from an iSCSI
port, the volume must be
read/write-enabled and
also usable as an S-VOL
(secondary volume).
Correct the settings, then
retry the operation.
E
6
8105 1193
You cannot add paths to
Continuous Access/Business
Copy/Cross-system Copy
pair volumes.
Please correct the settings,
then retry.
E
6
XP24000 Remote Web Console Error Codes
343