HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Table 78 Error Codes — Part Code 9010
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
9010
7440
An error occurred during
processing. If this problem
persists, please call
technical support.
If thesameproblem
persists despite retrying,
call
technical support.
E
2
9010 9303
There are no valid volumes.
Check the device emulation
type or the definition of the
journal volume.
W
0
Table 79 Error Codes — Part Code 9105
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
9105
5511
The program product is not
installed.
Please click [OK], then
install the program product.
W
5
9105 5600
The settings of the security
group are invalid.
Please click [OK], correct
the security group settings,
then retry th e operation.
W
0
9105 5601
The settings of the host
group are invalid.
Please click [OK], correct
the host group set tings, then
retry the operation.
W
0
9105 5602
The length of the letter string
is
invalid.
Please click [OK], correct
the length of the let ter string,
then retry th e operation.
W
0
9105 5603
The DKC emulation is
specified as thetypeofthe
host.
Please click [OK], specif
y
other
hosts, and retry the
operation.
W
0
9105
5604
The specified vendor
information is invalid.
Please click [OK], correct
the vendor information, and
retry the operation.
W
0
9105 5605
You cannot register any
more hosts.
Please click [OK], delete
unnecessary hosts, a nd retry
the operation.
W
0
9105 5606
The target LDEV is not
mounted.
Please click [OK], delete the
unmounted LDEV, and retry
the operation.
W 0
9105 5607
The settings of the LDEV
group are invalid.
Please click [OK], correct
the LDEV group settings,
and
retry the operation.
W 0
9105 5608
The pool group cannot
include volumes to which
LU paths are defined, or
volumes which are not
mounted.
Please click [OK], check the
attributes of the specified
volumes, and retry the
operation.
W
0
9105 5609
The R-VOL/T-VOL exists in a
group which cannot include
R-VOLs and T-VOLs.
1. Please click [OK]
.
2. Change the
group
attribute or del
ete the
R-VOL/T-VOL fro
mthe
group.
3.
Retry the opera
tion.
W 0
9105 5819
The specified port is not
supported by this function.
Specify a port supported by
this function.
W
0
XP24000 Remote Web Console Error Codes
36 7