HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
9605 58447
The command was rejected,
because you tried to set
VMA
to a logical volume
with a p ath set on.
Select other logical volumes
without VMA,ordelete
the path of the specified
logical volume, then retry
the operation.
E 5
9605
58448
The specified logical volume
is
blocked, or the LDEV
is
being formatted or
shredded.
Retry the operation after
the logical volume has
recovered from the blocked
status or
after the LDEV has
been formatted or shredded.
E 5
9605
58449
The capa
city of the logical
volume i
s
not the same as
that of
the
external volume
with wh
ich
the logical
volume
is
mapped.
Please do one of the
following:
1.
Execute the Volume
Initialize operation
on
the external group
to
which the logical
volume belongs in the
Customized Volume
window , and create
avolumehavingthe
same capacity as the
external volume.
2.
Execute the Make
Vol ume operation on
the external group
to
which the logical
volume belongs in the
Customized Volume
window , and create
avolumehavingthe
same capacity as the
external volume.
E 5
9605
58450
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E 5
9605 68002
This logical volume cannot
be
selected because it is
used as a volume for System
Disk.
Please check the logical
volume configuration, then
retry the operation.
E 5
Table 85 Error Codes — Part Code 9610
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
9610 7060
An error occurred during
processing. If this problem
persists, please call
technical support.
If this problem persists, call
technical support.
E
2
9610
7442
Thereis aninvalid valuein
the
Data Retention Utility
information.
If this problem persists, call
technical support.
E
3
9610 8112
There is no valid volume.
Please mount volumes, then
retry the operation.
W
6
XP24000 Remote Web Console Error Codes
381