HP StorageWorks XP24000 Remote Web Console User's Guide, v01 (AE131-96005, June 2007)

• Capacity: Volume c apacity. For an expanded (LUSE) volume, the total capacity of the LDEVs

that

consist of the LUSE volume is displayed.

• RAID:RAID level.

• Paths: Number of LU paths.

LDEV Window

For more detai

led

information about the displayed items, see the HP StorageWorks XP24000 Virtual

LVI/LUN (VLL)

and

Volume S hredder User's Guide.

Figure 34 The LDEV Window (Reports Display)

The displayed items on the LDEV dialog box a re as follows:

• SLPR drop-down list:

You can display information about a pa rticular SLPR when you select the SLPR from the SLPR

drop-down list. If you have logged on as a storage partition a dministrator, only information about

the

allocated SLPR is displayed, and you c a nnot select other SLPRs from this drop-down list.

• CU or PG:

You can choose which information to display in the LDEV list.

•If you click CU, two drop-down lists are displayed. You can select an LD KC from the drop-down

list on the left, and a CU from the drop-down list on the right.

•If you click PG, one drop-down list is d isplayed. You can select the parity group to display

from the drop-down list.

• LDEV list:

The following items are displayed in the LDEV list:

• SLPR: SLPR number and SLPR name.

• CLPR: CLPR number and CLPR name.

• LDKC:CU:LDEV:The LDKC number,the CU number,and theLDEVnumberare displayed. See

“LUN Window” on page 71 for the displayed icons.

• Emulation: Emulation type. For an expanded (LUSE) volume, the emulation type of the each

LDEV is displayed.

• MAX LBA:LDEV size recognizedbya host.

XP24000 Remote Web Console User’s Guide