HP StorageWorks XP24000 Remote Web Console User's Guide, v01 (AE131-96005, June 2007)

2.
Change to Modify mode(see“Changing Between View Mode and Modify Mode” on page 40).
3. In the Account Information tree, open the folder to which the user account for which you want to
change the password is registered.
4. In the Account Information tree, select the user ID of the user a ccount for which you want to
change the password.
5. Right-click on the user ID, and then select the Change Password command.
The Change Password dialog box (Figure 43 on page 88) is displayed.
6. In the Change Password dialog box, enter the password as follows.
• Current Password: Enter the current password. The current pa ssword is required when
Modify is not set for the Ac count Administrator Role of your user account.
• New Password: Enter the new password.
• Re-enter New Password: Enter the new password again for confirmation.
7. Click Set on the Change Password dialog box.
The Change Password dialog box is closed, and you return to the Account window.
8. Click Apply.
The set tings are app lied to the storage system.
Figure 43
The C hange Password Dialog Box (when Modify is not set for Accoun t
Administrator Role)
Changing User Operation Authority
To change the operation authority for the user account, log in with a user account for of which Modify is
set
for the Account Administrator Role.
Note: To change the o peration authority of a user account that is set to disable, you n ee d to set the user
account to enable, change the op eration authority of the user account, and then set the user accou nt
to
disable.
To change the operation authority of a user accou nt:
1.
Log in to Remote Web Console, and open the Account window (see Figure 28 on page 62).
2.
Change to Modify mode(see“Changing Between View Mode and Modify Mode” on page 40).
3. In the Account Information tree, open the folder to which the user account for which you want to
change the operation authority is registered.
4. In the Account Information tree, select the user ID of the user a ccount for which you want to
change the operation authority. In the User Information and Permission Information lists, the
operation authority of the selected user account is displayed.
5. Set the op eration authority of the Account Administrator Role, Audit Log Administrator Role,and
Storage Administrator Role by selecting from each drop-down list.
6. Set the operation authority of each function in the Permission Information list if Enable is set
for the operation authority of the Storage Administrator Role.
To set the operation authority of each function:
a. Select the row for which you want to set the operation autho rity. You can also select plural
rows by using the Shift key or Ctrl key .
88
Performing Remote Web Console Operations