HP StorageWorks XP24000/XP20000 Continuous Access Journal Software User Guide (T5278-96048, November 2011)

Table 45 Error Codes and Error Contents When Operating RAID Manager (continued)
Error ContentsError Code
(SSB2)
Error Code
(SSB1)
A request for XP Continuous Access Journal Pairresync (journal resync
mode) was received. However, the command was rejected because the
EBCA
journal restore operation is in progress in the XP Continuous Access Journal
pair having another mirror ID. If the XP Continuous Access Journal pair
having another mirror ID is in the Suspending status, reissue the request
after the pair status changes to the Suspend status. If the XP Continuous
Access Journal pair having another mirror ID is in the PAIR status, reissue
the request after a short delay.
The XP Continuous Access Journal pair cannot be resynchronized
(DELTAJNL parameter specifying), because the not-updated differential
information exists in the specified S-VOL.
EBCE
The XP Continuous Access Journal Pairresync (journal resync mode that
forcibly copies all data) was received because of the XP Continuous Access
EBCF
Journal Pairresync (journal resync mode) failed. The command was rejected
because the XP Continuous Access Journal pair was not in the HOLD
status.
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the desired capacity
EBD9
exceeded the charging capacity of the secondary storage system’s XP
Continuous Access. Check the license capacity as well as the related
program product.
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the desired capacity
EBDA
exceeded the charging capacity of the secondary storage system’s XP
Continuous Access Asynchronous. Check the license capacity as well as
the related program product.
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the desired capacity
EBDB
exceeded the charging capacity of the secondary storage system’s XP
Continuous Access Journal. Check the license capacity as well as the
related program product.
A request of XP Continuous Access Journal pair status transition was
received. However, the processing cannot be executed because the
EBDC
processing load of the storage system is heavy. Execute the command
again after a while.
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified S-VOL was
already used in the XP Continuous Access Journal pair for delta resync.
EBE0
A request of XP Continuous Access Journal Pairresync (journal resync
mode) was received. However, the command was rejected because all
EBE1
the S-VOLs of the specified restore journal group were not the other XP
Continuous Access Journal’s S-VOLs.
A request of XP Continuous Access Journal Pairresync (journal resync
mode) was received. However, the command was rejected because the
difference was not ready for the journal resync operation.
EBE2
The update data of XP Continuous Access (master journal group of the XP
Continuous Access Journal pair for delta resync operation) is inconsistent
with the update data of the restore journal group of the XP Continuous
Access Journal pair. Perform XP Continuous Access Journal Pairresync
(journal resync mode that forcibly copies all data).
Troubleshooting When Using RAID Manager 237