HP StorageWorks HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide (AA-RV1HA-TE, March 2005)

Preparing the Host System
109HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide
Note: Take note of the worldwide name (WWN) of each adapter. Do not power on
anything yet. For the FC switches to autoconfigure, power on equipment in a certain
sequence. Also, the controllers in the subsystem are not yet configured for
compatibility with IBM AIX.
The Host Bus Adapter (HBA) installation is accomplished by first installing the
HBA driver. The HBA driver is installed as part of the Solution Software
installation.
Note: If you are installing the RAID subsystem on an HACMP cluster, install the HBA
and its driver into each IBM host server in the cluster. For further information on
HACMP, see Appendix C.