HP StorageWorks HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide (AA-RV1HA-TE, March 2005)

Preparing the Host System
113HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide
At this point you are prompted to add a Client system. The Client system must be
an Intel 32-bit based machine running either Windows NT 4.0, Windows 2000, or
Windows Server 2003 and it must use a fixed IP address that is resolvable through
DNS or NIS. Here is the guide to the meaning of the communication and
monitoring options.
The Access Privilege options are:
■ 0—The Client can only view the main storage window; it cannot open a
system window for any of the RAID arrays on the host that you are currently
on
■ 1—The Client can view the main storage window and any of the system
windows. However, this Client cannot do any configuration.
■ 2—This Client can view any storage window and configure any RAID array
on the current host system
The Notification Options are:
■ 0—There is no asynchronous error notification to the Client.
■ 1—The Client machine receives notification via TCP/IP only. Only the
SWCC Client receives error messages.
■ 2—The Client machine is notified by SMNP only. This means that errors sent
out by the Agent can only be received by an SMNP Client. The SWCC Client
does not report any errors.
■ 3—The Client machine is notified by TCP/IP and SMNP. Both the SWCC
Client and an SMNP monitoring Client can receive errors messages from the
Agent.
In the following example we are adding a Client called client1 with full
monitoring privileges and error notification to client1 via TCP/IP and SNMP traps
Adding a Client system
---------------------------------------------
Enter the host name of the Client system: client1