HP StorageWorks HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide (AA-RV1HA-TE, March 2005)

FC Configuration Procedures
144 HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide
Note: Although an IBM operating system entry exists in the CLI and SWCC, for the
Fibre Channel connection, use the setting AIX_CAMBEX for operation with your IBM
host. The IBM setting may cause problems when LUNs are not available to AIX or
during controller failover.
9. Verify the changes:
SHOW CONNECTIONS
Mark or tag all Fibre Channel cables at both ends for ease of maintenance.
Repeating Procedure for Each Host Adapter
10. Repeat step 7, 8, and 9 for each of that adapter’s host connections, or delete
the unused connections from the table.
11. For each host adapter, repeat steps 6 through 10.