HP StorageWorks HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide (AA-RV1HA-TE, March 2005)

Using CLI for Configuration
166 HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide
Figure 40: Example storage map for the BA370 enclosure
The example system, shown in Figure 41, contains three non-clustered AIX hosts.
Port 1 link is separate from port 2 link (that is, ports 1 of both controllers are on
one loop or fabric, and port 2 of both controllers are on another). Therefore, each
adapter has two connections. The target numbers represent what the third number
of the disk number is. For example, if the disk number is disk10200, 2 is the target
number.
Port
123 45 6
Power
Supply
D2
S2
DISK103
00
D2
S2
DISK203
00
D2
S2
DISK303
00
D2
S2
DISK403
00
D2
D101
DISK503
00
spareset
member
DISK603
00
Power
Supply
3 Targets
Power
Supply D0
S1
MI
DISK102
00
D0
S1
M1
DISK202
00
D0
S1
M2
DISK302
00
D0
S1
M2
DISK402
00
D1
M3
DISK502
00
D1
M3
DISK602
00
Power
Supply
2
Power
Supply
D120
R2
DISK101
00
D120
R2
DISK201
00
D120
R2
DISK301
00
D120
R2
DISK401
00
D120
R2
DISK501
00
D120
R2
DISK601
00
Power
Supply
1
Power
Supply
D102
R1
DISK100
00
D102
R1
DISK200
00
D102
R1
DISK300
00
D102
R1
DISK400
00
D102
R1
DISK500
00
D102
R1
DISK600
00
Power
Supply
0