HP StorageWorks HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide (AA-RV1HA-TE, March 2005)

Using CLI for Configuration
169HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide
Plug serial cable from maintenance terminal into top controller.
CLEAR CLI
SET FAILOVER COPY=THIS
CLEAR CLI
SET THIS SCSI_VERSION=SCSI-2
SET THIS ALLOCATION_CLASS=0
RESTART OTHER
RESTART THIS
SET THIS TIME=10-Mar-2001:12:30:34
RUN FRUTIL
Y
Plug serial cable from maintenance terminal into bottom controller.
Note: Bottom controller (B) becomes “this” controller.
RUN FRUTIL
Y
SET THIS MIRRORED_CACHE
Note: This command causes the controllers to restart.
SET THIS PROMPT=“HLNDR BOTTOM”
SET OTHER PROMPT=“HLNDR TOP”
SHOW THIS
SHOW OTHER
Plug in the Fibre Channel cable from the adapter in host “PURPLE.”
SHOW CONNECTIONS
Do you intend to replace this controller's cache
battery? Y/N [Y]
Do you intend to replace this controller's cache
battery? Y/N [Y]