HP StorageWorks HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide (AA-RV1HA-TE, March 2005)

HACMP Notes for AIX
231HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide
There is no PVID for our disk on either node, so we assign a PVID on one node
and then get the other node to use the same PVID.
From here, you want to pick one node to do the entire configuration on and then
use the other node to simply import the needed information. In this case we use
node brutus as our main node and miranda as our other node.
3. On node brutus, execute the command
chdev -a pv=yes -l hdisk5
4. On node miranda, execute the command
chdev -a pv=yes -l hdisk4
5. Using the lspv command, examine the PVID on each disk to make sure that
they are the same.
Output from brutus:
Output from miranda:
6. Execute the command
lvlstmajor on each node in the cluster to get the next
available major number to use for a volume group:
Output from brutus:
45...
hdisk6 none none
hdisk0 0002997fb3fcfab5 none
hdisk1 0002997f32d9425d rootvg
hdisk2 none none
hdisk3 none none
hdisk4 none none
hdisk5 none none
hdisk6 none none
hdisk0 0000981f0ebaf585 none
hdisk1 0000981f6f1f38bb none
hdisk2 0000981f6c12e583 rootvg
hdisk3 none none
hdisk4 none none
hdisk5 none none
hdisk6 none none