HP StorageWorks HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide (AA-RV1HA-TE, March 2005)

Planning Storage Configurations
97HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide
Specifying Unit Switches
Several switches control the characteristics of units. The unit switches are
described under the
SET unit-number command in the HP StorageWorks HSG60 and
HSG80 Array Controller and Array Controller Command Line Interface
Reference Guide.
One unit switch, ENABLE/DISABLE_ACCESS_PATH, determines which host
connections can access the unit, and it is described in the larger topic of matching
units to specific hosts. This topic is covered in "Determining Connections",
page 41.