HP StorageWorks HSG80 ACS Solution Software V8.8 for Novell NetWare Installation and Configuration Guide (AA-RV1MA-TE, March 2005)

Using CLI for Configuration
148 HSG80 ACS Solution Software V8.8 for Novell NetWare Installation and Configuration Guide
Note: This command causes the controllers to restart.
SET THIS PROMPT=“BTVS BOTTOM”
SET OTHER PROMPT=“BTVS TOP”
SHOW THIS
SHOW OTHER
Plug in the Fibre Channel cable from the first adapter in host “RED.”
SHOW CONNECTIONS
RENAME !NEWCON00 RED1B1
SET RED1B1 OPERATING_SYSTEM=NETWARE
RENAME !NEWCON01 RED1A1
SET RED1A1 OPERATING_SYSTEM=NETWARE
SHOW CONNECTIONS
Note: Connection table sorts alphabetically.
Mark or tag both ends of Fibre Channel cables.
Plug in the Fibre Channel cable from the second adapter in host “RED.”
SHOW CONNECTIONS
Connection
Name
Operating
System
Controller Port Address Status
Unit
Offset
RED1A1 NETWARE OTHER 1 XXXX
XX
OL
other
0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXX
X-XXXX
RED1B1 NETWARE THIS 1 XXXX
XX
OL this 0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXX
X-XXXX