HP StorageWorks HSG80 ACS Solution Software V8.8 for Novell NetWare Installation and Configuration Guide (AA-RV1MA-TE, March 2005)

Installing, Configuring, and Removing the Client
194 HSG80 ACS Solution Software V8.8 for Novell NetWare Installation and Configuration Guide
Adding Storage Subsystem and its Host to Navigation Tree
The Navigation Tree enables you to manage storage over the network by using the
Storage Window. If you plan to use pager notification, you must add the storage
subsystem to the Navigation Tree.
1. Verify that you have properly installed and configured the HS-Series Agent
on the storage subsystem host.
2. Click Start > Programs > Command Console > StorageWorks Command
Console.
The Client displays the Navigation Window. The Navigation Window lets you
monitor and manage many storage subsystems over the network.
Figure 43: Navigation window
3. Click File > Add System.
The Add System window is displayed.
4. Type the host name or its TCP/IP address and click Apply.
5. Click
Close.