HP StorageWorks HSG80 ACS Solution Software V8.8 for Novell NetWare Installation and Configuration Guide (AA-RV1MA-TE, March 2005)

Installing, Configuring, and Removing the Client
196 HSG80 ACS Solution Software V8.8 for Novell NetWare Installation and Configuration Guide
Note: You can create virtual disks by using the Storage Window. For more
information on the Storage Window, refer to
HP StorageWorks Command Console
V2.5 User Guide
.
Removing Command Console Client
Before you remove the Command Console Client from the computer, remove
AES. This prevents the system from reporting that a service failed to start every
time the system is restarted. Steps 2 through 5 describe how to remove the
Command Console Client.
Note: When you remove the Command Console Client, the SWCC2.MDB file is deleted.
This file contains the Navigation Tree configuration. If you want to save this
information, move the file to another directory.
1. Click Start > Programs > StorageWorks Command Console and change to
the directory where you installed the Command Console Client.
2. Enter the following command:
C:\Program Files\Compaq\SWCC> AsyncEventService -remove
3. Do one of the following:
— On Windows NT 4.0, click Start > Settings > Control Panel, and
double-click the Add/Remove Programs icon in the Control Panel. The
Add/Remove Program Properties window is displayed.
— On Windows 2000 and Windows Server 2003, click Start > Settings >
Control Panel > Add/Remove Programs. The Add/Remove Programs
window is displayed.
4. Select Command Console in the window.
5. Do one of the following:
— On Windows NT 4.0, click Add/Remove.
— On Windows 2000 and Windows Server 2003, click Change/Remove.
6. Follow the instructions on the screen.