HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Linux X86 Release Notes (AA-RV1KA-TE, March 2005)

Documentation Updates
29HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Linux
X86 Release Notes
Documentation Updates
The following changes were made to the general content of these Release Notes
since they were last published:
■ The section "FC Switch Updates" was removed along with the Fibre Channel
Switch Support table. Switch support information is available in the HP
StorageWorks SAN Design Reference Guide at
http://h18006.www1.hp.com/st orage/sanin fra structur e.html .
■ The section “Ordering Modular Storage Systems” was removed. The Modular
Array (MA)/Enterprise Modular Array (EMA) storage systems can no longer
be ordered.
■ The section “Disk Device Support” on page 30 was updated.
■ The section “System Components” on page 30 was updated.
■ The section “Layered Software Applications” on page 33 was updated.
■ The following sections were moved to the HSG60 and HSG80 Array
Controller and Array Controller Software Maintenance and Service Guide,
HSG60 and HSG80 Array Controller and Array Controller Software
Troubleshooting Guide, or HSG60 and HSG80 Array Controller and Array
Controller Software Command Line Interface Reference Guide:
— Maximum Host Connections
— Rolling Upgrades
— Disk Partitioning
— Snapshot
— Write History Logging
—Using FRUTIL to Insert a New Controller
— FRUTIL Limitations in 8.8-1 Environments
— Saving your Configuration
— Patching ACS
— Identifying ACS Revision Level
— Important Notice Regarding Cache Sizes
— Adding, Moving, and Changing Devices
— Moving Storagesets