HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Linux X86 Release Notes (AA-RV1KA-TE, March 2005)

Hardware and Software Support
30 HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Linux
X86 Release Notes
Hardware and Software Support
This section lists the hardware, devices, and operating system versions that are
compatible with this Fibre Channel Solution Software Kit.
Array Hardware Support
ACS V8.8-1 is the firmware component of the HP StorageWorks HSG60 and
HSG80 array controllers. When configured in one of these controllers, ACS
supports the following storage arrays: MA8000, EMA12000, EMA16000,
MA6000, RA8000, and ESA 12000 storage systems. Additional information
regarding hardware specifications can be found at
http://h18006.www1.hp.com/products/storagewo rks/acs/related.html
Disk Device Support
To retrieve the latest list of devices supported with HSG60 and HSG80 array
controllers:
1. Go to the following link:
http://h18006 .www1.hp.com/produ cts/s torageworks/softwar edrive r s/acs/
2. Select the manuals (guides, supplements, addendums, etc) link under
self-help resources.
3. Select the HSG60, HSG80, HSJ80, HSZ80 Supported Disk Drive Matrix
link.
Switch Support
This Fibre Channel Solution Kit supports the Fibre Channel switches and
firmware versions listed in the HP StorageWorks SAN Design Reference Guide
and SAN Product Support Matrix at
http://h18006.www1.hp.com/st orage/sanin fra structur e.html
System Components
This Fibre Channel Solution Software Kit supports the system components and
operating system versions listed in Table 9.