HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Linux X86 Release Notes (AA-RV1KA-TE, March 2005)

Hardware and Software Support
31HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Linux
X86 Release Notes
StorageWorks Command Console (SWCC)
SWCC V2.5 is included in this release. V2.5 is used to identify the SWCC suite of
components.
SWCC provides a graphical user interface that can be used to configure and
monitor your storage system. Use of SWCC is highly recommended, but not
required. The SWCC Agent is installed as part of the Solution Software Kit.
For more information on SWCC installation, refer to the HSG80 ACS Solution
Software V8.8 Installation and Configuration Guide. For more information on
SWCC Client operation, refer to the Command Console V2.5 User Guide and the
Command Console V2.5 Release Notes.
Table 9: Minimum System Requirements
Component Requirement
Controller
Compatibility
HP StorageWorks HSG80 Array Controller, ACS V8.8-1 (or a
subsequently patched version of ACS V8.8)
Platform ProLiant X86 and ProLiant BL20p and BL40p Blade Servers
Operating System Red Hat Advanced Server 2.1 (2.4.9-e.38, 2.4.9-e.38smp, 2.4.9-e.38
enterprise, 2.4.9-e.40, 2.4.9-e.40smp, 2.4.9-e.40 enterprise,
2.4.9-e.41, 2.4.9-e.41smp, 2.4.9-e.41enterprise)
SuSE Linux Enterprise Server 8 (2.4.21-128-itanium2,
2.4.21-128-itanium2-smp, 2.4.21-215-itanium2,
2.4.21-215-itanium2-smp)
Topology Fibre Channel Switched (FC-SW)
SCSI Protocol SCSI-3
Failover Mode Multi-bus
Host Mode SUN
Disk Space 10 MB
Adapter
Compatibility
HP StorageWorks 64-bit, 2 Gbps PCI-X FC HBA 3R-A3751-AA
(281541-B21)
HBA FCA2214, driver V6.06.50, Firmware loaded from driver, BIOS
V1.34
HP StorageWorks 64-bit DC, 2 Gbps PCI-X FC HBA 3R-AA428-AA
(321835-B21) HBA FCA2214DC, driver V6.06.50, Firmware loaded
from driver, BIOS V1.34