Compaq StorageWorks UltraSCSI RAID Enclosure (DS-BA370 Series) User's Guide (EK-BA370-UG. C02, September 1998)

Single-Ended I/O Module
UltraSCSI RAID Enclosure 5–15
Turning On the Subsystem
Complete the procedures in Table 5–7 to turn ON the subsystem.
Table 5–7 Turning On the UltraSCSI Subsystem
1. If there are no expansion enclosures, go to step 3.
2. Turn O
N
all the ac input
boxes for each expansion
enclosure by pressing
I
on
each ac power switch
(C
ALLOUT
1).
3. On the master enclosure,
turn O
N
all the ac input
boxes by pressing
I
on each
ac power switch
(C
ALLOUT
1).
4. Verify that the array controller places the subsystem into an
operational state.
1
0
CXO5488B
2
1