Compaq StorageWorks UltraSCSI RAID Enclosure (DS-BA370 Series) User's Guide (EK-BA370-UG. C02, September 1998)

Power Distribution
6–12 UltraSCSI RAID Enclosure
Replacing a Power Supply
This section describes how to properly handle power supply SBBs
and the procedures for replacing a power supply.
Handling a Power Supply SBB
Table 6–2 defines the proper methods for handling a power supply
SBB to prevent damaging it.
Table 6–2 SBB Handling Rules
Do . . . Do NOT . . .
Set an SBB on its side. Set an SBB on its edge.
Set SBBs side by side. Stack SBBs.
Set an SBB down gently. Drop an SBB.
Push an SBB into the shelf
gently, but firmly.
Force the SBB into the shelf.
CXO6549A
CXO6550A
CXO6551A
CXO6552A
CXO6553A
CXO6554A
CXO6555A
CXO6556A