Compaq StorageWorks UltraSCSI RAID Enclosure (DS-BA370 Series) User's Guide (EK-BA370-UG. C02, September 1998)

Preface
xiv UltraSCSI RAID Enclosure
Chapter 4
This chapter describes the power verification and addressing (PVA)
assembly operation, functions, uses, configuration, and replacement
procedures.
Chapter 5
This chapter describes the single-ended input/output (I/O) module
operation, functions, uses, configuration, and replacement
procedures.
Chapter 6
This chapter describes the enclosure power distribution components
operation, functions, uses, configuration, and replacement
procedures.
Chapter 7
This chapter describes the disk drive operation, functions, uses,
configuration, and replacement procedures.
Chapter 8
This chapter describes blower operation, status reporting, and
replacement procedures.
Appendix A
This appendix describes enclosure specifications, which include
physical, electrical, and environmental specifications.
Appendix B
This appendix describes the procedures for installing components in
an enclosure to create an UltraSCSI RAID subsystem.
Appendix C
This appendix describes general procedures for installing EMU
microcode into an UltraSCSI RAID subsystem.
Glossary