Compaq StorageWorks UltraSCSI RAID Enclosure (DS-BA370 Series) User's Guide (EK-BA370-UG. C02, September 1998)

Operating the UltraSCSI Enclosure
UltraSCSI RAID Enclosure 2–5
See Table 2–1 for the Compaq-supported PVA SCSI ID switch
settings.
Starting the Subsystem
After assembling an enclosure and connecting enclosure cabling,
power is applied to start the subsystem.
Note
Before applying power to the subsystem, configure the
entire subsystem (including the host and the array
controller) as described in the appropriate publications.
Applying power to all the enclosures causes the EMU, PVA, and
array controller to automatically begin system operations.
Table 2–1 Compaq-Supported PVA SCSI ID Switch
Settings
Total Number
of Enclosures
Master
Enclosure
First
Expansion
Second
Expansion
1 0 None None
202None
3023