Compaq StorageWorks UltraSCSI RAID Enclosure (DS-BA370 Series) User's Guide (EK-BA370-UG. C02, September 1998)

Power Verification and Addressing

UltraSCSI RAID Enclosure 4–13

2. If there are no expansion enclosures, go to step 3.

If there are expansion enclosures, press and hold the PVA standby

power switch (C

ALLOUT

1) on an expansion enclosure until the

master EMU initiates a power shut down on all enclosures.

3. Press and hold the PVA standby power switch (C

ALLOUT

1) on the

master enclosure until the master EMU initiates a power shut down

on the master enclosure.

4. Turn O

all the ac input

boxes by pressing

on each

ac power switch

ALLOUT

1) on any

expansion enclosure and

then the master enclosure.

Table 4–6 Removing a PVA (Continued)

CXO6303A

CXO5488B