HP StorageWorks Command Console V2.5 User Guide (AA-RV1UA-TE, March 2005)
Table Of Contents
- Contents
- About this Guide
- About SWCC
- Using Command Console
- Setting Up Notification
- Required Components for Notification
- Setting Up Pager Notification
- Using SWCC with a Third-Party Storage Management Program
- Using Event Logging on the Client System to Monitor Your Subsystem
- Interpreting Agent Email Messages
- About Event Information Fields
- Mapping State Change Digits to RAID System Components
- Table 11: State Change Digit Position and Corresponding RAID system Component
- The First Digit of the State Change Field (Overall RAID System)
- The Second Digit of the State Change Field (Disks)
- The Third Digit of the State Change Field (Power Supply)
- The Fourth Digit of the State Change Field (Fans)
- The Fifth Digit of the State Change Field (Battery)
- The Sixth Digit of the State Change Field (Temperature)
- The Seventh Digit of the State Change Field (This_Controller)
- The Eighth Digit of the State Change Field (Communications LUN)
- The Ninth Digit of the State Change Field (Other_Controller)
- The 10th Digit of the State Change Field (External Factors)
- The 11th Digit of the State Change Field (Logical Units)
- Using the Storage Window
- Why Use the Storage Window?
- Configuring a Controller
- Creating Virtual Disks
- Deleting Virtual Disks
- Modifying Virtual Disks
- Configuring the Operating System to Recognize Virtual Disk Changes
- Setting Passwords and Security Options (Network Only)
- Managing and Creating Spare Devices
- Using Configuration Files
- Understanding the Icons
- CLI Window
- Integrating SWCC with Insight Manager
- Troubleshooting
- Troubleshooting Connection Problems
- Invalid Network Port Numbers During Installation
- Network Port Assignments for UNIX-Client/Server Systems
- DHCP and WINS
- Connecting Via the Host SCSI Port
- “Access Denied” Message
- Adding New System by Using Internet Protocol Address May Cause Client to Stop Responding
- “No Agent Running” Message When Adding System to the Navigation Tree
- Troubleshooting the Client
- Authorization Error When Adding an Agent System
- Cannot Open Storage Window
- Client Hangs When LUN Is Deleted
- CLI RUN Commands
- Event Notification for Subsystems Connected to a Client System
- Invalid or Missing Fault Displays and Event Logs
- Pager Notification Continues After Exiting the Command Console Client
- Reconfiguration After Controller Replacement
- Some Graphics Do Not Scale Well with Large Fonts
- Starting Client from the Command Prompt
- Warning Message Windows
- Virtual Disk Recovery from a Configuration File
- Troubleshooting the HS-Series Agents
- Cluster Integration for the HS-Series Agents
- Troubleshooting Connection Problems
- Using the Command Console LUN
- Interpreting SNMP Traps
- Glossary
- Index
Index
148 Command Console V2.5 User Guide
modem preferences 52
notification list
setup 46
numeric pager 46, 51
polling preferences 52
requirements 45
setting up 46
subsystem 47
SWCC 21
user profile 46
passwords
HS-Series Agent 79
Personal Communications Industry Association
(PCIA) 46
port 28, 52, 70, 91, 96
power supply 59, 83
R
rack stability, warning 15
RAID
controller 32
event 57
system failure 59
RAID 0 67, 72
RAID 0+1 72
RAID 1 72
RAID 3/5 67, 72
RAID Array 58, 106
RaidManager 57, 65
related documentation 10
remote copy mode 69
S
SCSI connection 25, 29, 31, 33, 93
serial connection 25, 28, 31, 99
services file 91, 92
SNMP 55, 111
example of trap 116
socket numbers 91
spares 69, 80
Storage Area Network (SAN) 25
storage system
management 29, 40, 54
monitoring 21, 26
status 21
Storage Window 34
accessing 31
configuring subsystem 67
corrupted 90
display modes 67
features 21
icon 40
security options 79
VGA 67
StorageWorks Enterprise Array Manager
(STEAM) 102
striped device group (RAID 0) 67
striped mirrored device group (RAID 0+1) 67
striped parity device group (RAID 3/5) 67
subsystem
configuring 67, 108
pager code 47
pager notification 47, 52
polling 52
restoring 81
SNMP trap 116
SVGA resolution 23, 67
SWCC
Agent 93
Client 96
components 21
connections 25, 35
features 21
integration with Windows NT 4.0 102
managing controller 34
notification options 45
SCSI bus 25
serial connection 25
Setup Window 88
Storage Area Network (SAN) 25
third-party storage management program
45, 54
symbols in text 12