HP StorageWorks HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide (AA-RV1RA-TE, March 2005)

FC Configuration Procedures

170 HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide

As an example of Option 4, you will:

■ Change the mode from fabric to loop.

■ Change the number of LUNs per Target.

■ Set the Target IDs.

Choose Record 2, and the following dialogue takes place. (Each information

message or prompt is prefaced with a bullet).

• Driver fca-pci is configured for Fabric mode.

Change the Mode from Fabric to Loop (For JNI HBAs only)

This is always the first statement during modify and serves as a reminder of the

mode of the adapter’s driver.

• Do you want to change this mode? [y,N]

This question prompts for a change of mode. Since, in this example, the mode is

currently set to ’fabric’, answering y will set the driver for loop mode. When you

implement loop mode, the ALPAs are used for access.

NN Adapter # Control. M LN Targets Port IDs ( WWPN ) Driver Path

-- --------- -- ------- -- --- ------- ------------------ ------------

1 fcaw 0 fcaw L 16 64,65 /sbus@2,0/fcaw@2,0

2 fibre-channel 0 fca-pci F16 64 5000-1fe1-0000-0d41

/pci@a,2000/fibre-channel@2

65 5000-1fe1-0000-0d42

3 fibre-channel1 fca-pci F 16 64 5000-1fe1-0000-0d41

/pci@b,2000/fibre-channel@2

65 5000-1fe1-0000-0d42

Select record number NN (Hit RETURN to escape.):