HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 deployment guide (AG421-96001, March 2007)
8 INTRODUCTION
Chapter 2, “In-Path Deployments,” describes physical in-path deployments.
Chapter 3, “Virtual In-Path Network Deployments,” describes virtual in-path
deployments.
Chapter 4, “Out-of-Path Network Deployments,” describes out-of-path
deployments.
Chapter 5, “Connection Forwarding,” describes how to configure the HP EFS
WAN Accelerator to forward connections in asymmetric networks.
Chapter 6, “Policy-Based Routing Deployments,” describes how to configure the
HP EFS WAN Accelerator for deployments using PBR, Cisco Discovery Protocol
(CDP), and auto-discovery.
Chapter 7, “WCCP Deployments,” describes how to configure the HP EFS WAN
Accelerator and routers for WCCP.
Chapter 8, “Serial Cluster and Cascade Deployments,” describes how to
configure the HP EFS WAN Accelerator in serial and cascade clusters to increase
optimization.
Chapter 9, “Proxy File Service Deployments,” describes how to configure the HP
EFS WAN Accelerator to perform PFS.
Chapter 10, “Quality of Service,” describes the HP EFS WAN Accelerator
Quality of Service (QoS) feature and how to implement it.
Chapter 11, “Network File System Optimization,” describes the HP EFS WAN
Accelerator Network File System (NFS) optimization feature and how to
implement it.
Chapter 12, “RADIUS and TACACS+ Authentication,” describes how to
configure Remote Authentication Dial-In User Service (RADIUS) or Terminal
Access Controller Access Control System (TACACS+) authentication for the HP
EFS WAN Accelerator.
Chapter 13, “Troubleshooting Deployment Problems,” describes common
deployment problems and possible solutions.
A glossary of terms follows the chapters, and a comprehensive index directs you to
areas of particular interest.