HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 deployment guide (AG421-96001, March 2007)

110 11 - NETWORK FILE SYSTEM OPTIMIZATION
4. If you have configured IP aliasing for an NFS server, specify all of the server’s IP
addresses in the HP EFS WAN Accelerator NFS protocol settings, as described in
“Configuring IP Aliasing” on page 110.
5. View and monitor QoS statistics in the Management Console Reports:
Performance: NFS Statistics page.
For detailed information, see the HP Enterprise File Services WAN Accelerator
Management Console User Guide.
Configuring IP
Aliasing
If you have configured Internet protocol (IP) aliasing (multiple IP addresses) for an
NFS server, you must specify all of the server’s IP addresses in the HP EFS WAN
Accelerator NFS protocol settings in order for NFS optimization to work properly.
To configure IP
aliasing on an HP EFS
WAN Accelerator
1. In the Management Console, navigate to the Setup : Optimization Service -
Protocol: NFS page.
2. Under Add New Server Configuration, in the Name box, type the name of the NFS
server.
3. In the Server IP box, type all of the IP addresses in the server’s IP alias list.
Separate each IP address with a comma.
4. Click Add Server.
For additional information on the Management Console, see the HP Enterprise File
Services WAN Accelerator Management Console User Guide.
For information about IP aliasing, refer to your operating system documentation.