HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 deployment guide (AG421-96001, March 2007)

118 12 - RADIUS AND TACACS+ AUTHENTICATION
Basic Steps 1. Configure the HP EFS WAN Accelerator. For detailed information, see the HP
StorageWorks Enterprise File Services WAN Accelerator Installation and
Configuration Guide.
2. Connect to the Management Console. For detailed information, see the HP
StorageWorks Enterprise File Services WAN Accelerator Installation and
Configuration Guide.
3. In the Management Console Setup: Authentication - General Settings page, define
the authentication methods. Make sure you put the authentication methods in the
order in which you want them to occur. If authorization fails on the first method,
the next method is attempted, and so forth, until all the methods have been
attempted.
For detailed information, see the HP Enterprise File Services WAN Accelerator
Management Console User Guide.
4. In the Management Console Setup: Authentication - TACACS+ Servers page,
specify:
 server IP address
 authentication port
 server key
 time-out interval
 retry interval
 optionally, global settings
For detailed information, see the HP Enterprise File Services WAN Accelerator
Management Console User Guide.