HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 deployment guide (AG421-96001, March 2007)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR DEPLOYMENT GUIDE 23
2 - IN-PATH DEPLOYMENTS
CHAPTER 2 In-Path Deployments
In This Chapter This chapter describes physical in-path network deployments and summarizes the
basic steps for configuring them. This chapter includes the following sections:
 “Introduction to Physical In-Path Deployments,” next
 “In-Path, Failover Support Deployment” on page 24
 “In-Path, Two Routing Points Deployment” on page 26
 “In-Path, Server-Side Deployment” on page 27
 “In-Path, Server-Side, One-to-One Deployment” on page 28
This chapter assumes that you are familiar with the HP EFS WAN Accelerator
Management Console (Management Console). For detailed information about the
Management Console and how to use it, see the HP Enterprise File Services WAN
Accelerator Management Console User Guide.
This chapter also assumes that you are familiar with the installation and configuration
process for the HP EFS WAN Accelerator. For detailed information, see the HP
StorageWorks Enterprise File Services WAN Accelerator Installation and
Configuration Guide.
This chapter provides the basic steps for physical in-path network deployments. It does
not provide detailed procedures. Use this chapter as a general guide for these
deployments. If you need additional assistance, contact HP Technical Support at http:/
/www.hp.com.
For detailed information about the factors you must consider before you deploy the HP
EFS WAN Accelerator, see “Design and Deployment Overview” on page 17.