HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 deployment guide (AG421-96001, March 2007)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR DEPLOYMENT GUIDE 27
2 - IN-PATH DEPLOYMENTS
Figure 2-4. In-Path, Two Routing Points Deployment
Basic Steps
(Client-Side)
Perform the following steps on each client-side HP EFS WAN Accelerator.
1. Configure the HP EFS WAN Accelerator as an in-path device. For detailed
information, see the HP StorageWorks Enterprise File Services WAN Accelerator
Installation and Configuration Guide.
2. Connect to the Management Console to verify your configuration. For detailed
information, see the HP Enterprise File Services WAN Accelerator Management
Console User Guide.
3. Configure your Interior Gateway Protocol (IGP) to prefer links A and B over links
C and D.
4. Apply and save the new configuration in the Management Console.
5. Begin optimization.
6. View performance reports and system logs in the Management Console.
Basic Steps
(Server-Side)
The server-side HP EFS WAN Accelerator is configured as an in-path device. For
detailed information, see the HP StorageWorks Enterprise File Services WAN
Accelerator Installation and Configuration Guide.
In-Path, Server-Side Deployment
An in-path, server-side deployment serves a single server or server subnet. This
deployment is simple to manage and LAN traffic is passed-through unoptimized. It
does not provide failover support if there is an error in the system.