HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 deployment guide (AG421-96001, March 2007)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR DEPLOYMENT GUIDE 49
5 - CONNECTION FORWARDING
Basic Steps
(Server-Side)
Perform the following steps on each of the server-side HP EFS WAN Accelerators.
1. Configure the server-side HP EFS WAN Accelerator as an in-path device. For
detailed information, see the HP StorageWorks Enterprise File Services WAN
Accelerator Installation and Configuration Guide.
2. Connect to the Management Console. For detailed information, see the HP
Enterprise File Services WAN Accelerator Management Console User Guide.
3. Navigate to the Setup: Advanced Networking - Connection Forwarding page in the
Management Console.
4. Configure each of the neighbors by specifying the in-path IP address for the
neighbor HP EFS WAN Accelerator.
Figure 5-4. Setup: Advanced Networking - Connection Forwarding Page
 Under Add New Entry, type the in-path IP address for the neighbor HP EFS
WAN Accelerator in the Neighbor IP text box.
 Type the neighbor port in the Neighbor port text box. The default port is 7850.
 Click Add Peer to add the neighbor appliance to your running configuration.
 Under General, click Enable Connection Forwarding.