HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 deployment guide (AG421-96001, March 2007)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR DEPLOYMENT GUIDE 57
6 - POLICY-BASED ROUTING
D
EPLOYMENTS
TIP: Enter configuration commands, one per line. End with CRTL-Z.
The Access Control List (ACL) defines the matching criteria. The route-map defines
the action corresponding to the matching criteria. The ip policy route-map command
attaches a route-map to an interface.
For detailed information about configuring Cisco routers for PBR, see http://
www.cisco.com/en/US/products/sw/iosswrel/ps1831/
products_configuration_guide_chapter09186a00800c60d2.html#23550.
Basic Steps
(Server-Side)
In this example, the server-side HP EFS WAN Accelerator is configured as an
out-of-path device. For detailed information, see the HP StorageWorks Enterprise File
Services WAN Accelerator Installation and Configuration Guide.
Configuring
PBR Using the
Management
Console
The following section describes the basic steps for configuring PBR using the
Management Console.
Basic Steps
(Client-Side)
Perform the following steps for each client-side HP EFS WAN Accelerator.